MULTI-TRANSDUCER
QT2-500
HSQT2-500
MULTI-TRANSDUCER
QT2-500
HSQT2-500
High Speed Multi Transducer HSQT2-500 is a essential tool for power supply and demand adjustment systems (FCR Frequency Containment Reserve)
This product is a multi-transducer suitable for control of extremely short-period components. The fastest response time from AC input to measurement output is 1 cycle + 10 ms. Therefore, this product can be used for applications such as power supply and demand adjustment systems (FCR Frequency Containment Reserve), which require high-speed control.
By simply connecting to one circuit of the power system, AC electrical quantities such as current, voltage, active power, reactive power, power factor, frequency, and tidal current calculation can be measured with a single unit. Measurement items can be set up freely according to the customer's purpose of use by simultaneously outputting analog, RS485 communication, and watt-hour pulses.
・High Speed Response Time: 30ms
・Frequency Measurement Intervel: 0.1sec or less
・Frequency Measurement error: within ±0.02Hz
・IEC 60688: 2012 (Transducers)
・IEC 62053: 2003 (Watt-Hour Meters)
Inputs can be switched between phase line type, voltage rating, and current rating by setting. 440V direct connection is also supported. Outputs are analog x 10 points, pulse x 2 points, and RS485 communication as standard.
By connecting this product to a PC, setting values can be written and read using dedicated software. The connection terminal uses the highly versatile USB Type-C.
A high-contrast OLED panel allows setting changes and measurement items to be displayed.
Test output by front panel operation enables wiring confirmation after installation. Voltage and current phase angles are displayed on the front panel to assist in identifying mis-wired locations.
| Type | Communication output |
Catalog | Instruction Manual |
Communication Specification |
Setting Software* |
|---|---|---|---|---|---|
| HSQT2-500 | Modbus RTU | TBA |  |
|
To User Page |
*By installing this configuration software on your PC, you can write and read the HSQT2-500 setting values via USB. Supported OS are Windows 8.1, Windows 10, and Windows 11. User registration is required to download the software.
Cover open
Cover closed