Plug-in transducer soft specification type : Daiichi Electronics Corporation

Plug-in transducer soft specification type

BACK

OUTLINE

High quality/high reliability is achieved w/ high-performanced electronic parts, running-in of individual part, electric running-in of product under high-temperature environment.
Printed circuit board (B side) is cleaned after parts mounting and processed in coating w/ high moisture resistance varnish and insulation resistance of substrate surface is stabilized and insulation deterioration is prevented.
W/ output limiter circuit to limit the output to be 1.5 times of rated value and protect equipment on output side even though excess input is applied.

catalog for soft specification type	catalog for type w/ parameter setting by programming unit	e_PLUG-IN-C series_Rev0.pdf SIZE:939KB total page no.:9
type configuration/ specification/ outline drawing	type configuration/ common specification/ outline drawing/ purchase specification	e_PLUG-IN-C kyoutuu_Rev0.pdf SIZE:452KB total page no.:2

addition/ subtraction transducer

CADTP1 -( )( )( )

addition/ subtraction transducer w/ 3 inputs.
Parameter change and simulated output for loop test are possible by programming unit(CCM-1).

catalog

e_PLUG-IN-C CADTP1_Rev0.pdf
SIZE:162KB
total page no.:1

Back to Page Top

multiplication/ division transducer

CMLTP1 -( )( )( )

multiplication/ division transducer w/ 3 inputs.
Parameter change and simulated output for loop test are possible by programming unit(CCM-1).

catalog

e_PLUG-IN-C CMLTP1_Rev0.pdf
SIZE:140KB
total page no.:1

Back to Page Top

temperature/ pressure correction transducer

CLTP1 -( )( )( )

transducer for operation including the condition(temperature/ pressure/ pressure difference) to measure flow rate.
Parameter change is possible by programming unit(CCM-1).

catalog

e_PLUG-IN-C CLTP1_Rev0.pdf
SIZE:141KB
total page no.:1

Back to Page Top

function generation transducer

CFGTP1 -( )( )( )

DC input broken line operation transducer.
DC input broken line: max. 15(break point X/ Y : 16 for each). Change is possible by programming unit(CCM-1).

catalog

e_PLUG-IN-C CFGTP1_Rev0.pdf
SIZE:153KB
total page no.:1

Back to Page Top

analog back up transducer

CAMTP1 -( )( )( )

transducer to back up the output when computer or PID controller is down.
Setting of input/ output follow-up operation(SPEED) and output holding function(HOLD) at auxiliary power failure is possible by programming unit(CCM-1).

catalog

e_PLUG-IN-C CAMTP1_Rev0.pdf
SIZE:169KB
total page no.:2

Back to Page Top

voltage pulse transducer

CVFTP1 -( )( )( )

transducer to convert DC input signal to unit pulse.
Setting of output pulse frequency/ pulse width/ output cut value at low input is possible by programming unit(CCM-1).

catalog

e_PLUG-IN-C CVFTP1_Rev0.pdf
SIZE:151KB
total page unit:1

Back to Page Top

program unit

CCM-1

Adjuster to change the setting value of soft specification type transducer(C series).
Any value can be outputted by programming unit(it goes without mentioning of data setting function) and convenient for loop test.

catalog

e_PLUG-IN-C CCM-1_Rev0.pdf
SIZE:106KB
total page no.:1

Back to Page Top

Inquiry for sales department	E-mail
TEL +81-3-3885-2411FAX +81-3-3858-3966	sales@daiichi-ele.co.jp

	BACK

Adobe Reader is necessary to view the PDF file.
Please download Adobe Reader.