Plug-in transducer 1 output type BACK

OUTLINE

Automation has been developed along with recent streamlining of power receiving units such as power plant and factory.
High quality/high reliability is achieved w/ high-performanced electronic parts, running-in of individual part, electric running-in of product under high-temperature environment.
Printed circuit board (B side) is cleaned after parts mounting and processed in coating w/ high moisture resistance varnish and insulation resistance of substrate surface is stabilized and insulation deterioration is prevented.
W/ output limiter circuit to limit the output to be 1.5 times of rated value and protect equipment on output side even though excess input is applied.

catalog for plug-in transducer 1 output type catalog for all types of plug-in transducer 1 output type.
e_PLUG-IN-1 series_Rev0.pdf

SIZE:3,406KB
total page no.:50
type configuration/ specification/ outline drawing type configuration/ common specification/ outline drawing/ purchase specification
e_PLUG-IN-1_kyoutuu_Rev0.pdf

SIZE :467KB
total page no.:7
Following catalog is the excerpt of plug-in transducer 1 output type catalog.



DC transducer
TP-( )( )
Convert to compatible signal among systems by amplifying various kinds of signals.
This product can be used for compatible signal among systems/ V-I conversion, etc.

catalog

e_PULG-IN-1 TP_Rev0.pdf

SIZE:112KB
total page no.:1
Back to Page Top

isolator
TP2-( )( )( )
Convert to compatible signal among systems by amplifying various kinds of DC signals. This product can be used for following purposes. Delivery of insulated signals among power measuring system/ shutdown of noise/ prevention of sneak in control circuit and direct transmission of output signal to distant place.

catalog

e_PULG-IN-1 TP2_Rev0.pdf

SIZE:150KB
total page no.:2
Back to Page Top

isolator w/ lower limit
TP2 -( )( )( )L
Lower limit(fixed) function w/ DC output in proportion to input.

catalog

e_PULG-IN-1 TP2-L_Rev0.pdf

SIZE:151KB
total page no.:2
Back to Page Top

AC current transducer
AETP2 -( )( )( ) , ATP2 -( )( ) , AP2 -( )( )
Convert AC current in electric system to DC signals in proportion to input amount.


catalog for constant voltage/ constant current output RMS value type

e_PULG-IN-1 AETP2_Rev0.pdf

SIZE:92KB
total page no.:1
AETP2 -( )( )( )


catalog for constant current output/ no auxiliary power type


e_PULG-IN-1 ATP2_Rev0.pdf

SIZE85KB
total page no.:1
ATP2 -( )( )


catalog for fixed load/ low price type


e_PULG-IN-1 AP2_Rev0.pdf

SIZE95KB
total page no.:1
AP2 -( )( )
Back to Page Top

AC voltage transducer
VETP2 -( )( )( ) , VTP2 -( )( ) , VP2 -( )( )
Convert AC voltage in electric system to DC signals in proportion to input amount.


catalog for constant voltage/ constant current output RMS value type

e_PULG-IN-1 VETP2_Rev0.pdf

SIZE:72KB
total page no.:1
VETP2 -( )( )( )


catalog for constant current output/ no auxiliary power type


e_PLUG-IN-1 VTP2 Rev0.pdf

SIZE66KB
total page no.:1
VTP2 -( )( )


catalog for fixed load/ low price type


e_PULG-IN-1 VP2_Rev0.pdf

SIZE:76KB
total page no.:1
VP2 -( )( )
Back to Page Top

analog limiter
ALTP -( )( )( )
DC output which is changing in preset constant speed can be obtained against suddenly changing various kinds of DC input signal.

catalog

e_PULG-IN-1 ALTP_Rev0.pdf

SIZE:121KB
total page no.:1
Back to Page Top

analog memory
AMTP -( )( )( )
Convert to compatible signal among systems by amplifying various kinds of DC input signals.
Output at any moment can be held for a long time by ON to OFF between HOLD terminals.

catalog

e_PULG-IN-1 AMTP_Rev0.pdf

SIZE:149KB
total page no.:1
Back to Page Top

constant response
CRTP -( )( )( )
convert to necessary DC signal by selecting scaling constant(max. 6 range) according to DC input.

catalog

e_PULG-IN-1 CRTP_Rev0.pdf

SIZE:118KB
total page no.:1
Back to Page Top

current loop supply (distributor)
DTP2-C1( )( ) DTP-C10( )
Supplying power source to 2-wire system transmitter, receiving DC4-20m signal from transmitter and outputting proportional DC signal.
2 types: insulation type/ non-insulation type.

catalog for insulation type current loop supply

e_PULG-IN-1 DTP2_Rev0.pdf

SIZE:113KB
total page no.:1
DTP2-C1( )( )

catalog for non-insulation type current loop supply.

e_PULG-IN-1 DTP_Rev0.pdf

SIZE:150KB
total page no.:1
DTP-C10( )
Back to Page Top

DC power transducer
DWP1 -( )( )( )( )( )
Convert to DC signals in proportion to DC power in electric system.

catalog

e_PULG-IN-1 DWP1_Rev0.pdf

SIZE:273KB
total page no.:2
Back to Page Top

frequency transducer
FTP2 -( )( )( )
Convert frequency in electric system to DC signals in proportion to input amount.

catalog

e_PULG-IN-1 FTP2_Rev0.pdf

SIZE:104KB
total page no.:1
Back to Page Top

revolution speed transducer (frequency proportion type)
GTP2 -( )( )( )( )
With AC voltage outputted by tachogenerator connected to generator, etc. as input and convert to DC signals in proportion to frequency(frequency proportion type) or voltage (voltage proportion type).

catalog

e_PULG-IN-1 GTP2_Rev0.pdf

SIZE:122KB
total page no.:1
Back to Page Top

thermocouple transducer
HTP1 -( )( )( )( )
Insulating input / output and converting to DC signals in proportion to temperature with thermoelectromotive force of various kinds of thermocouple as input.

catalog

e_PULG-IN-1 HTP1_Rev0.pdf

SIZE:249KB
total page no.:2
Back to Page Top

linearizer
LTP1 -( )( )( )
Convert input signal which is not in linear relation with measuring amount such as signal of differential pressure signal/ flow meter/ analizer to linear signal.

catalog

e_PULG-IN-1 LTP1_Rev0.pdf

IZE:125KB
total page no.:1
Back to Page Top

multiplication transducer
MTP1 -( )( )( )
Outputting DC signal corresponding to the value which is obtained by multiplying 2 DC signals.

catalog

e_PULG-IN-1 MTP1_Rev0.pdf

SIZE:131KB
total page no.1
Back to Page Top

potentiometer transducer
RTP2 -( )( )( )
By replacing mechanical angle and position displacement to resistance value change of potentiometer as input and convert to DC signals in proportion to displacement by insulation.

catalog

e_PULG-IN-1 RTP2_Rev0.pdf

SIZE:299KB
total page no.:2
Back to Page Top

selsyn transducer
STP1 -( )( )( )
Convert turning angle or position displacement of selsyn transmitter to DC signal w/ excellent linearity.

catalog

e_PULG-IN-1 STP1_Rev0.pdf

SIZE:148KB
total page no.:1
Back to Page Top

addition transducer
ADTP1 -( )( )( )
Outputting DC signal corresponding to the value which is obtained by adding 2 DC signals.

catalog

e_PULG-IN-1 ADTP1_Rev0.pdf

SIZE:122KB
total page no.:1
Back to Page Top

division transducer
DITP1 -( )( )( )
Outputting DC signal corresponding to the value which is obtained by dividing 2 DC signals.

catalog

e_PULG-IN-1 DITP1_Rev0.pdf

SIZE:105KB
total page no.:1
Back to Page Top

revolution speed transducer (AC voltage proportion type)
GVTP2 -( )( )( )( )
With tachogenerator mounted to generator, etc. as input and convert to DC signals in proportion to revolution speed(AC voltage).

catalog

e_PULG-IN-1 GVTP2_Rev0.pdf

SIZE:122KB
total page no.:1
Back to Page Top

super high speed isolator
HSTP1-( )( )( )
Convert to compatible signal among systems by amplifying various kinds of DC signals.
This product can be used for insulation of control circuit feed back signal as super high speed response (500μsec or less/90%).

catalog

e_PULG-IN-1 HSTP1_Rev0.pdf

SIZE:160KB
total page no.:2
Back to Page Top

pulse isolator
PPTP2-( )( )
Outputting in 2 outputs relay contact output or open collector by insulating input pulse signal.

catalog

e_PULG-IN-1 PPTP2_Rev0.pdf

SIZE:197KB
total page no.:1
Back to Page Top

pulse rate tarnsducer
PRTP2 -( )( )( )
Convert pulse input signal to pulse signal w/ n division. Input signal system can be selected from open collector/ voltage pulse/ 1a contact. Output signal system can be selected from open collector/ voltage pulse/ 1a contact.

catalog

e_PULG-IN-1 PRTP2_Rev0.pdf

SIZE:123KB
total page no.:1
Back to Page Top

resistance temperature transducer
RHTP2 -( )( )( )( )
Insulating input/ output and converting to DC signals in proportion to temperature with resistance value of 3-wire system resistance bulb as input.

catalog

e_PULG-IN-1 RHTP2_Rev0.pdf

SIZE:233KB
total page no.:2
Back to Page Top

reverse isolator
RVTP2 -( )( )( )
Outputting various kinds of DC input signal and output signal in reverse relation.

catalog

e_PULG-IN-1 RVTP2_Rev0.pdf

SIZE:151KB
total page no.:2
Back to Page Top

square transducer
SQTP1 -( )( )( )
Outputting DC signal in proportion to square of various kinds of DC signals.

catalog

e_PULG-IN-1 SQTP1_Rev0.pdf

SIZE:121KB
total page no.:1
Back to Page Top

square root transducer
SRTP1 -( )( )( )
Outputting DC signal in proportion to square root of various kinds of DC signals.

catalog

e_PULG-IN-1 SRTP1_Rev0.pdf

SIZE:121KB
total page no.:1
Back to Page Top

super slow pulse transducer
UGTP2 -( )( )( )
Convert to DC signal in proportion to input pulse no.. Input signal system can be selected from open collector/ voltage pulse/ 1a contact.

catalog

e_PULG-IN-1 UGTP2_Rev0.pdf

SIZE:118KB
total page no.:1
Back to Page Top

analog/ pulse transducer
VFTP2 -( )( )( )
Convert DC input such as power or power transducer to proportional unit pulse no..

catalog

e_PULG-IN-1 VFTP2_Rev0.pdf

SIZE:279KB
total page no.:2
Back to Page Top



Inquiry for sales department E-mail
TEL +81-3-3885-2411FAX +81-3-3858-3966 sales@daiichi-ele.co.jp

BACK

Adobe Reader is necessary to view the PDF file.
Please download Adobe Reader.
Copyright DAIICHI ELECTRONICS CO.,LTD.